Set Up Intercompany Transactions

Intercompany partnerships make it easier to handle accounting processes when two or more subsidiaries of a company frequently do business with each other. Partners can exchange transactions, such as sales and purchases, and handle them either manually or automatically. For example, when a partner sends a sales journal line to another partner, a purchase journal line is created for the receiving partner.

The intercompany chart of accounts can be, for example, a version of the synchronization partner's chart of accounts. Each partner maps their accounts to the intercompany chart of accounts. Each partner also maps their dimensions and dimension values to the intercompany dimensions.

Note

Note:
In 2023 release wave 1 we've introduced an improved Intercompany Setup page. The new page makes it easier to set up an intercompany partnership by consolidating all of the set up tasks in a single page. If you're new to Business Central, you're already using the new experience. If you're an existing customer, your administrator can turn on the Automatically accept intercompany general journal transactions feature switch on the Feature Management page.

The tasks in this article assume that the feature switch is turned on. If you've already set up an intercompany partnership, you can continue using it.

Before you start

Before you start to set up your intercompany partnership, there are a few decisions to make.

Decision	Description
Which chart of accounts should be the basis for the intercompany chart of accounts?	All companies in the partnership must use the same intercompany chart of accounts. You can base your intercompany chart of accounts on the chart of accounts from one of the companies in the partnership, or create a new intercompany chart of accounts. You map the accounts to use in the partnership in both ways, so that each partner both sends and receives transactions in the correct accounts. Learn more about setting up the intercompany chart of accounts at Set up the intercompany charts of accounts.
Which dimensions should be the basis for the intercompany dimensions?	If you use intercompany dimensions, they must be the same for all companies in the partnership. After you specify your intercompany dimensions, map their dimension values. Learn more about mapping dimension values at Set up intercompany dimensions.
Which partners are customers or vendors, or both?	Learn more about setting up customers and vendor companies in an intercompany partnership at Set up intercompany partners as customers and vendors.
Do you want to specify bank accounts to use in the partnership?	You can speed up the process of registering payment transactions by specifying the bank account to use for each partner company. Learn more at Specify the bank accounts to use for intercompany partners.
How do you want to identify the companies in the partnership?	All parties must agree on a unique intercompany partner identification code for each company. You'll assign the code to customer and vendor cards to identify related transactions. Learn more about identifiers at Create Number Series.
How do you want to handle item numbers?	If intercompany lines contain items, you can either use your own item numbers, or you can set up your partner's item numbers for each item, either in the Vendor Item No. field or in the Common Item No. field on the item card. You can also use the Item Reference action to map your items' numbers to your intercompany partners descriptions of the items. To learn more about item references, go to Use Item References.
Are resources involved?	If intercompany sales transactions will include resources, fill in the IC Partner Purch. G/L Acc. No. field on the resource card for each resource. The field contains the number of the intercompany general ledger account that the amount for this resource will post to in the partner company. To learn more about resources, go to Set Up Resources. NOTE Intercompany purchase transactions that include resources, fixed assets, and item charges are not fully supported. In the partner company, the Line Type field will be blank on purchase document lines that include these entities. You must manually update the field.

Overview of the steps to get started

Use the Intercompany Setup page to set up the following components of intercompany transactions:

• Your company's intercompany settings.
• The company that will be the synchronization partner.
• The intercompany chart of accounts that all he partners use to exchange transactions.
• The mappings between accounts in the chart of accounts and intercompany chart of accounts for inbound and outbound transactions for each partner.
• The intercompany dimensions and dimension values to use, and how they're mapped to dimensions for each partner.
• The companies that are the intercompany partners.
• The companies that are vendors or customers, or both.

Set up a synchronization partner

All partners must use the same intercompany chart of accounts and, if needed, the same intercompany dimensions. You can save time when you set up the partnership by using the chart of accounts and dimensions for one of the partners as a baseline for the intercompany chart of accounts and dimensions. The company that you use as the baseline is called the synchronization partner. Typically, the synchronization partner is the headquarter company, but it doesn't have to be.

On the Intercompany Setup page, each partner specifies the synchronization partner in the Synchronization Partner field. Afterward, the intercompany chart of accounts and intercompany dimensions are automatically specified for them, based on the setup for the synchronization partner. The partners then use the Intercompany Chart of Accounts Mapping and Intercompany Dimension Mapping pages to map their chart of accounts and dimensions to the intercompany chart of accounts and dimensions, and vice versa.

Note

Note:
It's important to map accounts and dimensions in both directions. That is, both to the intercompany chart of accounts and dimensions, and from them to your own accounts and dimensions.

Connect with partners in another tenant or environment

If one or more partners' Business Central is in another tenant or environment, there are a few extra steps to create the connection. The steps apply to all partners in another tenant or environment.

• Set up Business Central as a registered app in Azure portal.

• Add and enable the app registration in Business Central.

• Exchange information about their intercompany setups. Each partner can get this information from the Intercompany Setup, Actions, Connection Details.

  Copy from the partner's setup	Copy to your setup
  Current Connection URL	IC Partner's Connection URL
  Current Company ID	IC Partner's Company ID
  Intercompany ID	IC Partner's Intercompany ID
  Company Name	IC Partner's Company Name

• Exchange the following authentication settings so that Business Central can authenticate when it connects. Each partner can get this information from their registered app. To learn more about how to create a registered app, go to Create a registered app in Azure portal.

  • Client ID
  • Client secret
  • Token endpoint
  • Redirect URL

Run the Intercompany Setup, Actions, Connection Details in all companies to specify the information.

Create a registered app in Azure portal

This process is only necessary if you want to connect with a partners whose Business Central is in a different tenant or environment.

Tip

Tip:
It's a good idea to have a text editor open, such as Notepad, while you create your registered app. You'll need some of the information when you run the Intercompany Setup, Actions, Connection Details, so it's nice to have the information handy.

1. Go to Azure portal.
2. Choose the Microsoft Entra ID service.
3. In the navigation pane, choose App registrations.
4. On the App registrations page, choose new registration.
5. Give the application a name.
6. Choose the Accounts in any organizational directory (Any Microsoft Entra ID tenant - Multitenant) account type.
7. For the redirect URI, in the Select a platform field, choose Web, and then provide the URI. For example, *https://businesscentral.dynamics.com/OAuthLanding.htm*.

If you're working with an embed ISV, you might need a different URI.

8. Register the app.
9. On the Intercompany App page, on the navigation pane, choose API permissions.
10. Choose the Add a permission action.
11. On the Microsoft APIs tab, choose Dynamics 365 Business Central.
12. On the Request API Permissions pane, choose Application permissions, and then choose the API.ReadWrite.All permission.
13. On the Intercompany App | API permissions page, choose the Grant admin consent for Contoso action, and then grant consent.
14. On the navigation pane, choose Certificates & secrets.
15. Choose the Client secrets tab, and then choose New client secret.
16. On the Add a client secret pane, enter a name for the secret, and specify when it will expire.

Note

All partners who are in different environments must renew the secret before it expires.

Important

Copy the ID in the Value field before you leave the Intercompany App | Certificates & secrets page. You'll need it in a later step, and it won't be available after you leave the page. For example, paste the value in a text editor.

17. On the navigation pane, choose Overview.
18. Copy the value in the Application (client) ID field. For example, paste the value in a text editor.
19. Choose the Endpoints action, and then copy the value in the OAuth 2.0 token endpoint (v2) field. For example, paste the value in a text editor.
20. Copy the value in the Directory (tenant) ID field. For example, paste the value in a text editor.
21. In the token value you copied, replace organizations with the value you copied from the Directory (tenant) ID field in the previous step.

Add and enable your registered app in Business Central

1. Choose the icon, enter Microsoft Entra Application Card, and then choose the related link.
2. Fill in the fields as necessary. Hover over a field to read a short description.
3. In the State field, choose Enabled.
4. Choose the Grant Consent action.
5. In the Permission Set field, choose D365 INTERCOMPANY CE & DATA ACCESS IC CE permission sets.

Set up the intercompany charts of accounts

All partners must use the same intercompany chart of accounts, and map the accounts in their own chart of accounts to it. If the chart of accounts for your company defines the intercompany chart of accounts for your partner companies, follow the steps in this section.

If you're using an XML file that contains the intercompany chart of accounts, follow the steps in Import or export an intercompany chart of accounts.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.

2. Choose the IC Chart of Accounts action.

3. To add accounts, do one of the following on the Intercompany Chart of Accounts page:

   • Choose New, and then enter each account on a line on the page.
   • If your intercompany chart of accounts will be identical or similar to your regular chart of accounts, you can fill on the page automatically by choosing the Copy from Chart of Accounts action. You can edit the new lines as needed.
   • If you have set up an intercompany chart of accounts for a synchronization partner, use the Synchronization Setup action to copy those accounts.

   Tip

   If you copy the intercompany chart of accounts from a synchronization partner, you can use the Synchronization Setup action to update your intercompany accounts with any changes the partner makes to theirs.

The next step is to map your chart of accounts to the intercompany chart of accounts. Learn more at Map the intercompany chart of accounts to your company's chart of accounts.

Import or export an intercompany chart of accounts

The synchronization company can share its chart of accounts with partners by exporting it to a file. Partners can import the file to get the chart of accounts.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.
2. Choose the IC Chart of Accounts action.
3. On the Intercompany Chart of Accounts page, choose the Import/Export action, and then choose either Import or Export.
4. Choose the file to import or export.

The Intercompany Chart of Accounts page is filled with new or edited G/L account lines according to the intercompany chart of accounts in the file. Any existing, unrelated lines on the page remain unchanged.

Map the intercompany chart of accounts to your company's chart of accounts

When you've defined or imported the intercompany chart of accounts, map each intercompany account with one of your accounts. On the Intercompany Chart of Accounts page, you specify how intercompany G/L accounts on incoming transactions map to G/L accounts from your company's chart of accounts.

If the intercompany accounts and your accounts have the same numbers, you can map the accounts automatically.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.

2. Choose the IC Chart of Accounts action.

   Tip

   To access the actions on the page, you might need to expand the page to the wide layout view.

3. On the Intercompany Chart of Accounts page, choose the Chart of Accounts Mapping action.

4. You can map the accounts manually, or automatically.

   • To manually create the mapping, on the Intercompany Chart of Account and G/L Chart of Accounts panes, choose an account, and then choose an account in the G/L No. and IC No. fields.
   • To automatically map accounts that have the same numbers, select the lines that you want to map, choose the Map to Acc. with Same No action, and then choose the chart of accounts to update.

   Tip

   If you want to map many or perhaps all accounts, choose a line, choose , and then choose Select More.

Set up intercompany dimensions

If partners will exchange transactions with dimensions linked to them, agree on the dimensions that all of you will use. For example, the synchronization company can create a simplified version of their dimensions, export them to an XML file, and then distribute the file to each partner. Each partner can import the XML file on the Intercompany Dimensions page and then map the intercompany dimensions to their dimensions. Learn more at Map intercompany dimensions to your company's dimensions.

Note

Note:
Each company must map their dimensions to the intercompany dimensions for outgoing documents and incoming documents. Mapping accounts in both directions is important, and helps maintain consistency across the companies.

If partners will use the synchronization partner's intercompany dimensions, follow the steps in this section. If you want to share using an XML file that contains the intercompany dimensions, follow the steps in Import or export intercompany dimensions.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.

2. Choose the IC Dimensions action.

3. To add dimensions, do one of the following on the Intercompany Dimensions page:

   • Choose New, and then enter each dimension on a line.
   • If your intercompany dimensions will be identical or similar to your regular dimensions, you can fill on the page automatically by choosing the Copy from Dimensions action. Afterward, you can edit the lines as needed.
   • If you have specified intercompany dimensions for a synchronization partner, use the Synchronization Setup action to copy those dimensions.

   Tip

   If you copy the intercompany dimensions from a synchronization partner, you can use the Synchronization Setup action to update your intercompany dimensions with any changes the partner makes to theirs.

Import or export intercompany dimensions

The synchronization company can share its dimensions with partners by exporting them to a file. Partners can import the file to get the dimensions.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.
2. Choose the IC Dimensions action.
3. On the Intercompany Dimensions page, choose the Import/Export action, and then choose either Import or Export.
4. Choose the file to import or export.

The next step is to map the dimensions with the intercompany dimensions. Learn more at Map intercompany dimensions to your company's dimensions.

Map intercompany dimensions to your company's dimensions

After you specify the dimensions you'll use, map each intercompany dimension with one of your company's dimensions, and vice versa. Use the Intercompany Dimensions Mapping page to specify the mapping. Afterward, repeat the process for the dimension values.

• Specify how intercompany dimensions on incoming transactions map to dimensions from your company's list of dimensions.
• Specify how your dimensions will be translated into intercompany dimensions on outgoing transactions.

If any of the intercompany dimensions have the same code as the corresponding dimensions in your company, you can automatically map the dimensions.

In the following steps, you first map intercompany dimensions to dimensions for incoming documents in the Intercompany Dimensions pane. Then, you map dimensions to intercompany dimensions for outgoing documents on the Current Company Dimensions pane.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.

2. Choose the IC Dimensions action.

3. On the Intercompany Dimensions page, choose the Dimensions Mapping action.

4. You can map the dimensions manually, or automatically.

   • To manually create the mapping, on the Intercompany Dimensions and Current Company Dimensions panes, choose a dimension, and then choose a dimension in the Dim. Code and IC Dim. Code fields.
   • To automatically map dimensions that have the same code, select the lines that you want to map, choose the Map dimensions with same code action, and then choose the dimensions to update.

   Tip

   If you want to map many or perhaps all dimensions, choose a line, choose , and then choose Select More.

5. Choose the Dimension Values Mapping action.

6. On the Intercompany Dimension Values Mapping page, the steps to create the mapping are similar to what you just did for dimensions.

Set up intercompany general journal templates and batches

You must set up a general journal template and a general journal batch to use by default for intercompany transactions. The template and batch are especially important if you automatically accept intercompany transactions from your partners. To learn more about auto-accepting transactions, go to Auto-accept transactions from intercompany partners.

• General journals are used to post to general ledger accounts and other accounts, such as bank, customer, and vendor accounts. Posting with a general journal always creates entries on general ledger accounts. Use the Intercompany General Journal page to set up the general journal batch to use. The settings that are specific to intercompany transactions are the accounts you specify in the IC Account Type and IC Account No fields.
• Journal templates give you a journal page that's designed for a specific purpose. That is, the fields in journal templates are exactly the ones needed for a particular part of the program. Use the General Journal Templates page to set up a template to use for intercompany transactions.

To learn more about general journal templates and batches, go to Use journal templates and batches.

Set up a company for intercompany transactions

The following steps assume that a synchronization partner is set up with the chart of accounts and dimensions on which you'll base the intercompany chart of accounts and dimensions. You can set them up yourself, but it's typically faster to get started, and maintenance is easier, to you use a synchronization partner. Learn more about the synchronization partner, go to Set up a synchronization partner.

Tip

Tip:
It's a good idea to fill in the fields on the General FastTab on the Intercompany Setup page for each partner before you add their partners. When you add partner companies that are in the same tenant, Business Central gets their IC code and company name from their setup on the General FastTab. The Company Name field will verify that their IC code is unique.

Note

Note:
If you'll use a synchronization partner, leave the Synchronization Partner field blank when you set that company up for the partnership.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.
2. On the Intercompany Setup page, fill in the fields on the General FastTab. Hover over a field to read a short description.

Note

Note:
In Business Central online, you can't use file locations to transfer transactions to your partners because Business Central can't access your local network. Therefore, if you choose File Location in the Transfer Type field, the Folder Path field is not available. Instead, the file will be downloaded to the Downloads folder on your computer. You then send the file to someone in the partner company, for example, by email. For a more direct process, we recommend that you choose Email.

The next step is to set up the partner companies.

Set up intercompany partners

Each partner must add all other companies in the partnership as a partner.

1. Choose the icon, enter Intercompany Setup, and then choose the related link.
2. On the Intercompany Partners FastTab, choose Add.
3. On the Intercompany Partner page, fill in the fields. Hover over a field to read a short description.
4. Repeat steps 2 and 3 for all companies in the partnership.

Note

Note:
For intercompany posting, if you turn on the Auto. Accept Transaction toggle on the Intercompany Partner page Business Central suppresses messages that warn about purchase invoices duplicating the original purchase order. It's important to have a business process for managing duplicates. For example, by deleting such purchase orders when the purchase invoice is received from the intercompany partner.

Set up intercompany partners as customers and vendors

1. Choose the icon, enter Intercompany Setup, and then choose the related link.

2. On the Intercompany Partners FastTab, open the card page for the partner.

3. Depending on what you want to do, choose the customer or partner in the Customer No. or Vendor No. fields.

   Note

   Note:
   If the customer or vendor hasn't been created, you can choose +New in the drop-down menu to set them up. To learn more about creating customers and vendors, go to Register New Customers and Register New Vendors.

   Tip

   You can also specify a customer or vendor as an intercompany partner by filling in the IC Partner Code field on the Customer Card and Vendor Card pages.

Set up default intercompany partner general ledger accounts

When you create an intercompany sales or purchase line to send as an outgoing transaction, enter an account from the intercompany chart of accounts as a default for which account in your partner's company the amount is posted to. On the G/L Account Card page, for accounts that you regularly use on outgoing intercompany sales or purchase lines, you can specify a default intercompany partner general ledger account. For example, for your receivables accounts, you can enter the corresponding payables accounts from the intercompany chart of accounts. The receivables and payables accounts are used as the off-setting account for the intercompany partner when you post transactions on intercompany general journals.

Then, when you enter a general ledger account in the Bal. Account No. field on an intercompany line with Intercompany Partner in the Account Type field, the IC Partner G/L Account field is automatically filled in.

1. Choose the icon, enter Chart of Accounts, and then choose the related link.
2. Open the G/L account that's used for intercompany transactions, and in the Default IC Partner G/L Account field, enter the intercompany general ledger account that your partner will post to when you post to the general ledger account on the line.
3. Repeat step 2 for each account that you often enter in the Bal. Account No. field on a line in an intercompany journal or document.

Auto-accept transactions from intercompany partners

To make it faster to process intercompany transactions, you can specify that you want to automatically create journal lines based on an intercompany partner's posts from the IC General Journal page. To auto-create incoming and outgoing transactions, you must turn on the following toggles for each partner:

• On the Intercompany Setup page, turn on the Auto. Send Transactions toggle for the synchronization partner. Then specify where to create received intercompany journal transactions by filling in the Default IC Gen. Jnl. Template and Default IC Gen. Jnl. Batch fields.

  Tip

  If the Default IC Gen. Jnl. Template field is blank, you need to set up a general journal template to use for your intercompany general journals. To learn more about templates and batches, go to Set up intercompany general journal templates and batches

• On the Intercompany Partner page, turn on the Auto Accept Transactions toggle.

The journal lines are created for you, but not posted.

Note

Note:
If your organization used intercompany features in Business Central before 2022 release wave 1, to auto-accept transactions your administrator must turn on the Automatically accept intercompany general journal transactions feature switch on the Feature Management page.

Specify the bank accounts to use for intercompany partners

To facilitate fast payments, specify one or more bank accounts to use for intercompany partners. When a partner uses an intercompany general journal to make a payment, they can specify the bank account on the line. The bank account is used as the balancing account in the receiving company, which minimizes the need to manually enter transactions.

• To specify the bank account to use, on the Intercompany Partners page, choose the Bank Accounts action. On the Intercompany Bank Account Card, enter the account information.

Troubleshoot your intercompany setup

On the Intercompany Setup page, the Intercompany Setup Diagnostics pane contains tiles that indicate whether you have set up all of the components needed to exchange intercompany transactions. The tiles are also available on the Business Manager Role Center. Choose the tiles to find out what's missing. For an overview of the required components, go to Overview of the steps to get started.

See also

Managing Intercompany Transactions
Finance
Setting Up Finance
Work with General Journals
Work with Business Central

Find free e-learning modules for Business Central here